View Single Post
  #1 (permalink)  
Old September 4, 2008, 02:03 PM
geokilla's Avatar
geokilla geokilla is offline
Hall Of Fame
F@H
 
Join Date: Aug 2008
Location: Toronto
Posts: 3,741

My System Specs

Default Trying to Reach 3.8Ghz on E7200

I'm trying to overclock the E7200 to 3.8Ghz on a EP35-DS3L, however it's not passing over a minute of OCCT. I'm trying to get it stable at 3.7Ghz at the moment. The temperatures are fine and they won't pass over 63C when I'm running Linpack.

Here are my BIOS settings:

C1E, EIST, TM2: All disabled
FSB: 390Mhz
PCI-E: 100Mhz
C.I.A.2: Disabled
RAM Multiplier: 2.00 (1:1)
RAM Timings: 5-5-5-15
FSB Voltage: +0.1V
MCH Voltage: Standard
CPU Voltage: 1.375V in BIOS. CPU-Z Idle: 1.328V. CPU-Z Load:1.296V.

Any advice on how to get it up to 3.8Ghz and above is greatly appreciated.
__________________
Reply With Quote