Quote:
Originally Posted by enaberif  What fans do you have on that rad? They look to be 38mm fans which aren't necessarily the best for rads. |
I have the Scythe Ultra Kaze fan on it. (link:
NCIX.com - Buy Scythe Ultra Kaze 120MM High Static Pressure Silent Fan 38MM 1000RPM 44.4CFM 19.8DBA - DFS123812L-1000 In Canada.)
Quote:
Originally Posted by CanadaRox The sensor movement should be fine, well within the "normal" range. Do both of the core temperatures match (within a few C) or is one crazy while the other seems proper. I know a lot of the 45nm's have screwy temp sensors so that might be the issue. Also, make sure you don't have too much thermal paste, you could try remounting it as well. Only other thing I can think of is maybe an airbubble somewhere in the rad or waterblock. Try tilting your case around and see if any bubbles pop up anywhere. Good luck. |
Okay, I'll tilt my case a bit and see what will happen. I should shut down first, shouldn't I?
(Oh and the temps for the two cores are always the same as each other in Real Temp)