How to make you own Memory Cooler (RAM)
View Single Post
July 31, 2008, 11:32 PM
Join Date: Jun 2008
Location: Brisbane, Australia
Originally Posted by
Just checked the offical ATX 2.1 standard .pdf document for the measurements. Did a little conversions annndddd:
Mounting holes are 72.39mm x 157.48mm.... Seems likes those bolts he used must be bent or slanted.
Well that was an excellent observation but that is why he commented to give the bolts 1mm of play. I built one and could only get 2 of the bolts in but it is mounted very firmly and the other bolts are acting like posts. Overall my cooling project lowered my load temps by 10C so far;
Air Cooling Project: 101. Lowered CPU load by 9-10C
Yes the cable management sucks but the rest is going fine.
Q6600@3.15Ghz|CNPS9500|GA-EP45T Extreme|GSkill 2GB 1333MHz|Sapphire 4850|OZC GameXtreme 700|XP64
My System Specs
View Public Profile
Send a private message to Boldeagle
Find all posts by Boldeagle