Thread: WC 2 x 780TI's
View Single Post
  #2 (permalink)  
Old November 12, 2013, 02:30 PM
hero1's Avatar
hero1 hero1 is offline
Allstar
 
Join Date: Mar 2013
Location: Kitchener
Posts: 729

My System Specs

Default

Quote:
Originally Posted by rjbarker View Post
Hi Guys
A little preliminary "sniffing" for some advice from the "guru's here....of the WC'ing types!

Ishould have a couple of 780Ti's the end of this week...now, if I wanted to go full blown WC'ing, basically be looking at:

2 x GPU Blocks with SLi adapter / fitting
1 x 360 or 480 Rad
1 x Pump (not sure type)
1 x Reservoir

All the fittings....any advice suggestions feel free to let me know...was thinking of sending Daz an email and see if he could put a list together for me...is that cool?

Yes, lots of researching as well...

I'll look at mounting the Rad down below in my 900D, curious of a 360 Rad is good enough for 2 Cards or possibly moving to 3 Cards at some point, or is a 480 Rad better or just plain over kill.

I'm going to leave my H320 on my CPU as its doing a great job, but I am getting tired of how warm these GPU's run and listening to the fans on em ;)
Woohoo. Now we are talking. I say grab the EKWB XTX 480 mm rad (4x120), D5 vario, EKWB blocks when they come out, and res!

https://www.dazmode.com/store/produc...20mm_radiator/
https://www.dazmode.com/store/produc...servoir_combo/
https://www.dazmode.com/store/produc...wm_8-24v_pump/
Reply With Quote