View Single Post
  #147 (permalink)  
Old July 29, 2008, 09:33 AM
encorp's Avatar
encorp encorp is offline
Hall Of Fame
Join Date: Apr 2008
Location: Toronto
Posts: 3,422

My System Specs


Originally Posted by Eldonko View Post
Reply from Dave in applied research:

Couple ideas here and he is going to ask around. Seems some experiments are in order.
Pinnacle Agencies in Nova Scotia might be able to help/supply or direct you where to get appropriate admix for concrete should you decide to poor some corners; it wouldn 't be too hard to make some cheap wood frames; grab a bag of concrete and sopme admix (it's typically not -that- expensive compared to the rest of your stuff lol) and use some of that silicone you're working on to fill in between the concrete corners and the plexi...

Pinnacle Agencies > Home ( DNN 4.3.3 )

Not sure if it helps at all but thought I'd drop a link just in case!
DISCLAIMER: The views and opinions expressed in the immediately preceding post are those of encorp and do not reflect the views and/or opinions of family, friends, or anyone remotely associated with encorp unless explicitly stated. encorp does not make any warranty, express or implied, or assumes any liability or responsibility for the quality, factuality or use of information in the immediately preceding post.