View Single Post
  #13 (permalink)  
Old July 25, 2008, 10:21 AM
encorp's Avatar
encorp encorp is offline
Hall Of Fame
Join Date: Apr 2008
Location: Toronto
Posts: 3,422

My System Specs


Originally Posted by CMetaphor View Post
Just checked the offical ATX 2.1 standard .pdf document for the measurements. Did a little conversions annndddd:
Mounting holes are 72.39mm x 157.48mm.... Seems likes those bolts he used must be bent or slanted.
They're slanted, because he does say in it that the holes may not fit exactly - which is why he didn't tighten the bolt fully so that it left room to adjust them.
DISCLAIMER: The views and opinions expressed in the immediately preceding post are those of encorp and do not reflect the views and/or opinions of family, friends, or anyone remotely associated with encorp unless explicitly stated. encorp does not make any warranty, express or implied, or assumes any liability or responsibility for the quality, factuality or use of information in the immediately preceding post.
Reply With Quote