View Single Post
  #7 (permalink)  
Old July 7, 2013, 06:23 AM
3.0charlie's Avatar
3.0charlie 3.0charlie is offline
3.0 "I kill SR2's" Charlie
Join Date: May 2007
Location: Laval, QC
Posts: 9,933

My System Specs


I set up a Raid 10 on my SR2 using 2 Raptors 74Gb and 2 Raptors 80Gb drives. No problems whatsoever.

As previously mentioned, change the drive BIOS setting from AHCI to RAID, then enter the utility using the CTRL+ (x) - watch the screen or check your manual, since it varies from one BIOS manufacturer to another. Once in the RAID utility, follow the instructions.

Very simple these days. Once in the OS, install the Intel Rapid Storage Technology software to verify and assess the array's health.
Hydro-Quebec is salivating...
Reply With Quote