Thread: Work in progress Rampage
View Single Post
  #4 (permalink)  
Old March 21, 2013, 12:35 PM
Mark's Avatar
Mark Mark is offline
Allstar
 
Join Date: Sep 2008
Location: Bolton, Ontario
Posts: 859
Default

I relocated the swap chamber to the side, riveted all together, drilled and tapped for some added mb screws so I can put in the Lexan beerier. Also cut the back of the case ( rectangular area ) so I can easily plug in the sata and power cables to the SSD and HD. Waiting for more supplies including ( the u-channel is a must for the cut out area's in a Lian Li case ).
  1. 1x 6ft u-channel
  2. 1x 12" x 12" Di-Noc CF sheet
  3. 1x PC Window Applique "Asus ROG"
  4. 1x Molex Pin Removal Tool
  5. 1x 120mm Silver Overkill Turbine
  6. From MnpcTech.com
Attached Images
       
__________________



CHEERS
Reply With Quote