Thread: cheap hose
View Single Post
  #14 (permalink)  
Old March 15, 2013, 06:59 PM
clshades clshades is offline
Hall Of Fame
 
Join Date: May 2011
Location: Calgary
Posts: 1,374

My System Specs

Default

Quote:
Originally Posted by KaptCrunch View Post
same as linar if were on same floor

so would need second pump along loop before 10ft head mark
Water exterts no pressure horizontally... only vertically dude. There might be a bit of static load but most pumps can deal with this. It also doesn't matter how big or small the container at the top or bottom is the weight of water never changes if it is above 4 degrees C. And exactly what Abyss said... what goes up must come down so it cancels out.

Water weighs .433 pounds per square inch per foot of height. You are correct about the head pressure... if you can only get 10 feet of head pressure and you have to go 11 feet you will have zero pressure. You can solve this problem by putting another pump back to back if you choose to increase head pressure or you can purchase a better pump.

If you need 10 psig to go 10 feet up and require 10psig at the top of 10 feet you need a pump that does 20psig. If you wanna get really technical you can also add in pressure reducing valves and an expansion tank and throw a bigger pump at it... hell throw in a lift check valve while your at it. :P

*had to fix my math there... I'm tired.
__________________
__________________________________________________ __________
"Lesson's cost money... good ones costs lots" -Tony Beets (gold rush)
__________________________________________________ __________
Mah Rig now
Mah Rig before
My stuff for sale.

Last edited by clshades; March 15, 2013 at 07:53 PM.
Reply With Quote