Thread: Upside down rad
View Single Post
  #11 (permalink)  
Old March 15, 2013, 06:46 PM
clshades clshades is offline
Hall Of Fame
Join Date: May 2011
Location: Calgary
Posts: 2,634

My System Specs


Originally Posted by Mark View Post
Yeah, I'm leaving it right side up. Drilled a 1/8" whole and glued in a brass bolt with J-B Quick weld compound. Then thread in a screw with an O ring and some Loctite..then I'll test it :). This is the lowest point so I will have 90 % of the water drained from there. My XSPC reservoir is the next item that needs a proper drain but that will be much easier since it's thick Lexan by the looks of it.

That's 2 of 10 problem solved. :)
I honestly wonder why they don't make most rads like this already dude. They should have ports on both sides to make this process a no brainer.
__________________________________________________ __________
"Lesson's cost money... good ones costs lots" -Tony Beets (gold rush)
__________________________________________________ __________
Mah Rig now
Mah Rig before
My stuff for sale.
Reply With Quote