Thread: Upside down rad
View Single Post
  #10 (permalink)  
Old March 15, 2013, 06:44 PM
Mark's Avatar
Mark Mark is offline
Join Date: Sep 2008
Location: Bolton, Ontario
Posts: 862

Yeah, I'm leaving it right side up. Drilled a 1/8" whole and glued in a brass bolt with J-B Quick weld compound. Then thread in a screw with an O ring and some Loctite..then I'll test it :). This is the lowest point so I will have 90 % of the water drained from there. My XSPC reservoir is the next item that needs a proper drain but that will be much easier since it's thick Lexan by the looks of it.

That's 2 of 10 problem solved. :)

Reply With Quote