View Single Post
  #7 (permalink)  
Old March 6, 2013, 09:37 AM
mdrejhon mdrejhon is offline
Rookie
 
Join Date: Nov 2012
Location: Toronto, Ontario
Posts: 45
Default

Quote:
Originally Posted by 10e View Post
A great advantage to these screens is that you can play around with the 3D settings in the nVidia control panel to get 120hz AND basically blur free image quality by turning on Lightboost even in regular games withOUT using the 3D feature. The Blur Busters Blog | Mark Rejhon's information site about scanning backlights, LCD motion blur elimination techniques, and projects. is a great resource for this. A guy named Mark Rejhon has done a lot of work and research almost to the point of obsesssion.
That's me.

Quote:
Originally Posted by 10e View Post
I can attest to it working with my BenQ XL2420T and my similar GPU hardware setup. It actually reduces motion blur to a point that is about 90% the same as CRT, and still a fair bit better than regular 120hz.
Here's a new tip; if you can live with reduced brightness.
Lower the LightBoost setting via the monitor's menus (OSD) downwards to about 50% or less, even as low as 10%. The reduces the strobe lengths of the LightBoost stroboscopic backlight; and reduces motion blur even further, to be more similar to CRT phosphor decay (under 2ms). The image is slightly dimmer but the motion clarity now matches CRT

Quote:
Originally Posted by JayDeeHobbit View Post
I'll try that "Blur Busters" and see what results I get.
I'm the guy who wrote one of the more popular LightBoost HOWTO's. (I actually live in Toronto, by the way -- so I'm a local!) For the best CRT silky motion effect, make the frame rates match refresh rates -- so make sure you test LightBoost (when using it in 2D without glasses) on games that easily run 120fps -- such as Source Engine video games (older games). You should not have problems getting that framerate.
Let me know if you have any questions.

Last edited by lowfat; March 7, 2013 at 07:06 PM.
Reply With Quote