View Single Post
  #10 (permalink)  
Old March 2, 2013, 07:19 PM
sswilson's Avatar
sswilson sswilson is offline
Join Date: Dec 2006
Location: Moncton NB
Posts: 16,495

My System Specs


Originally Posted by 3.0charlie View Post
The fan is attached to the heat sink using side clips, and the fan(s) can be installed after the heat sink body to the board. As such, even taller ram sinks should not be a problem, and the fan install in a worst-case scenario can be adjusted.
Even to the point of having the fan installed "higher" on the tower heatsink to allow clearance, and/or just re-orienting the cooler in an up/down position as opposed to the optimal (for airflow) front/back position.

I keep a new 212+ on hand at all times even though I don't do that many builds these days. Still top of my list for bargain coolers. (strangely enough as was the AC7 pro... I did reviews/build logs on both.... ;) ).
Gigabyte Z97N-WIFI / i7 4770K / 2X 8G Gskill 1866 Sniper / XFX XTR 750 / EVGA GTX 970 SSC ACX 2.0+
Corsair 380T / Corsair H100i GTX AIO/ Intel 730 Series 480GB SSD / Seagate Barracuda 1TB / Dell UltraSharp U2412M

Asrock AM1H-ITX / AM1 Athlon 5350 / 2X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / Uncased 256GB Sandisk Z400S SSD / Mini-Box M350 / 24" Westinghouse L2410NM
Reply With Quote