View Single Post
  #14 (permalink)  
Old February 23, 2013, 07:58 AM
Jeff1961's Avatar
Jeff1961 Jeff1961 is offline
Top Prospect
Join Date: Dec 2010
Location: Toronto, ON
Posts: 69

My System Specs


Thanks everyone. I will spend the morning testing various things.
1. remove and reconnect gpu
2. remove and reinstall the H100i

Two suggestions i'm not familar with...i've never removed and installed a cpu, and "pull the battery"...this will change my bios back to the defaults correct? I'm not sure what that will require me to do if it brings back the bios.

Corsair forums have responded with a "may have to loosen or reseat cpu and h100i".

btw...I hand-tightened the pump on to the cpu. However it was awkard getting the first screw to tighten with the pump cables tension pulling it away from the cpu. I may have had too much tension on the upper portion before tightening the lower screw on the pump...which could have nudged the cpu out a bit. Anyways....onward we go...

Last edited by Jeff1961; February 23, 2013 at 08:12 AM.
Reply With Quote