View Single Post
  #1084 (permalink)  
Old February 18, 2013, 12:44 PM
Rollergold's Avatar
Rollergold Rollergold is offline
Top Prospect
F@H
 
Join Date: Aug 2012
Location: Calgary
Posts: 121

My System Specs

Default

My first custom loop. Nothing out of the ordinary here, I'm new to custom water cooling so I didn't want to do anything too radical.
  • HAF 932 + Corsair HX 850
  • i7 920 cooled by Swiftech Apogee HD
  • 2x EVGA GTX 680 SC's with XSPC Razor Blocks
  • Alphacool NexXxoS UT60 Full Copper Triple 120mm Radiator & Alphacool NexXxoS XT45 Full Copper Single 120mm Radiator
  • 4x Gentle Typhoon 1150 (AP-13)
  • Swiftech MP655-SE Pump
  • Switech Maelstrom Res
  • Tygon R3603 5/8 OD 3/8 ID tubing, (yes I know of its leeching problem. I will be watching it very closely and will replace it when I flush my system in 6 months or earlier if needed)
  • Swiftech Lok Seal Compression Fittings
  • Primochill PC Pure Clear Fluid

If your wondering why I have 2 floppy SLI connectors when only running 2 way SLI, my 2 680's act like spoiled brats and demand both SLI fingers be used to enable SLI when in those PCIe Slots.

Clear Tubing and fluid, who needs colored tubing or fluid when you have LED light strips

Also is it just me or was anyone else just a slight bit nervous when they switched on their first custom loop for the first time? I spent over 8 months researching and planing, the system passed its 24+ hour leak test with ZERO leaks but even then I just a little nervous when I pushed the power button for the first time.
__________________

Asus P6X58-E WS | i7 920 D0 @ 4.01ghz W/ Apogee HD Block | 24gb (3x 8gb) Corsair Vengeance 1600 | 2x EVGA GTX 680 SC's in SLI W/ XSPC Razor Blocks |
4x 1tb WD Black Drives | SB Recon 3D PCIe | Swiftech MP655-SE Pump | Swiftech Maelstrom Res | CM HAF 932 | Corsair HX 850 (3 yr's old) | Asus VH236H + PA238QR
Reply With Quote