View Single Post
  #3 (permalink)  
Old February 12, 2013, 05:46 AM
OC-Guru's Avatar
OC-Guru OC-Guru is offline
Top Prospect
Join Date: Jan 2013
Location: London, UK
Posts: 121

My System Specs


Originally Posted by Dragonstongue View Post
Is very likely a ram voltage/timing issue. Phenom II are known to not always like 1600 ram, 1333 100% 1600 ~92% higher then that drops to around 80% or lower it seems, but you are overclocking it, so might just be voltages are off a bit, or you need to change multi-s somewhat to relax the ram oc, or increase it maybe?

Anyways general error code for 0x0000005 is
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
this isn't for my personal computer sorry.. this is for a multipoint server I've setup.. it's running an i5 with 16GB RAM, It's based off of a HP Pro 6300

HP Compaq Pro 6300 Small Form Factor PC | HP® United States
Wife's rig / D3 Bot PC: 2x Xeon E5335 @ 2Ghz (8C/8T) | 24GB DDR2 RAM | ASUS GTS 450 1GB | HP OEM Socket 771 Motherboard | 4x Seagate ST9900805SS RAID0
D3 BT - Crispe#2349 (EU) - add me! :)
Reply With Quote