View Single Post
  #5 (permalink)  
Old February 5, 2013, 08:29 PM
IRQ Conflict's Avatar
IRQ Conflict IRQ Conflict is offline
Hall Of Fame
Join Date: Mar 2009
Location: Drayton Valley, AB
Posts: 1,777

My System Specs


Not painting vertically is good advice if your a novice. Use a temporary spray tack on the side of the board you plan to attach to the case. Use a flat clear coat to spray around the edges, let it dry then apply the colour(s) you want. That should ensure a nice clean line.

Use two or three coats of paint rather than one or two heavy coats.

Edit: You might want to brush the clear coat on to make sure is seals off the edges properly.

Last edited by IRQ Conflict; February 5, 2013 at 08:35 PM.
Reply With Quote