View Single Post
  #1 (permalink)  
Old January 26, 2013, 05:32 PM
MARSTG's Avatar
MARSTG MARSTG is offline
Hall Of Fame
Join Date: Apr 2011
Location: Montreal
Posts: 3,880

My System Specs

Unhappy Cannot add Fermi card on H77 mobo

Hello folks
I have an issue with my mobo, Gigabyte H77M-D3H, when I install a graphics card to be added to the system, the sytem is booting in a loop. The card in question is the GT430, a Gigabyte card, namely GV-N430OC-1GL. Internal video chip is active on my core i5, the video is output on the HDMI port. When i add the card I can see the BIOS image flash, I can enter the bios fine, but it does not go any further. In bios I set the video output to be done on the internal video chip first, as what I want is to add the 430 as a folding card, I don't want to make it a display card. The bios on the mobo is F9. I tried seating the card in both pciex 16 slots with no success. What should I do? PSU is not an issue, I have a brand new Antec Earth Watts 380 installed today.

Last edited by MARSTG; January 26, 2013 at 05:40 PM.
Reply With Quote