Thread: Corsair H100
View Single Post
  #8 (permalink)  
Old January 10, 2013, 10:55 PM
Rollergold's Avatar
Rollergold Rollergold is offline
Top Prospect
F@H
 
Join Date: Aug 2012
Location: Calgary
Posts: 121

My System Specs

Default

Quote:
Originally Posted by IRQ Conflict View Post
Thanks gingerbee. I do plan to take this chip to 4GHz. Maybe 4.2GHz if it will do that. I assume that Tcase is very close to core as they are attached? Tjunction, I think for this CPU is 95c. I haven't come close to that though. Oddly enough, the "CPU Temp" read by PC Probe is lower than my motherboard temp. Probably case ambient. I don't even look at that sensor though.

I hope the Antec cooler is better quality than the fan they supplied with the P180b case I bought from them.

Edit: Just had a look at the 920. Wow, that is a bit loud don't ya think? Does the H100 do better at lower fan speed?
I would say yes since the H100 is a dual rad cooler. Though I would replace the fans regardless of which cooler you buy. The stock H100/H80 fans produce great pressure but they are sever grade loud. Also as a second opinion Linus did a face off of the H100i VS the H80i and the H100 handily beat the H80i
Best Type of CPU Cooler Final Answer Linus Tech Tips - YouTube
__________________

Asus P6X58-E WS | i7 920 D0 @ 4.01ghz W/ Apogee HD Block | 24gb (3x 8gb) Corsair Vengeance 1600 | 2x EVGA GTX 680 SC's in SLI W/ XSPC Razor Blocks |
4x 1tb WD Black Drives | SB Recon 3D PCIe | Swiftech MP655-SE Pump | Swiftech Maelstrom Res | CM HAF 932 | Corsair HX 850 (3 yr's old) | Asus VH236H + PA238QR
Reply With Quote