Flow is too low with two pumps.
View Single Post
December 26, 2012, 11:36 AM
Hall Of Fame
Join Date: Feb 2008
Originally Posted by
Haha no beer in the loop. The problem was the beer in me. It was very good beer. No I've redone the loop so the res is mounted under the top two fans. The ports on the rad are still higher than the res so I will be tipping the case to move the air bubbles out. Had a bit of a leak down by the pump. Faulty 90 degree fitting. Fourth one so far. Replaced that and all is good so far.
from pic's is bubbles still flowing in loop? after fixing!
90's sharpe are not good in a loop 45 more suited if needed
My System Specs
DFI LanParty Jr X58
Intel 980x @3.3 Ghz 6 cores 12 threads
Mushkin 6 x 991776 tri-ram
680 GTX oc no SLi just using power to 480 GTX for PhysX
hitachi wdc Black wdc Raptors sata dock
1000watt cheap unit drives peltier,water pump
none tray WC cpu 53, chipset 29c all cores loaded
Realtek High Definition Audio tosi lnked 400amp
Main:sharp 46"lcd Secondary: samsung 21"lcd
Win 7 Pro 64
View Public Profile
Send a private message to KaptCrunch
Find all posts by KaptCrunch