View Single Post
  #6 (permalink)  
Old December 2, 2012, 05:35 PM
sf101's Avatar
sf101 sf101 is offline
Join Date: Jun 2012
Posts: 465

Originally Posted by icu222much View Post
The ram is under no stress. I placed the heat sink first, then the ram next.

Originally I had the heatsink rotated the other way so the fan was pointed to the back of the case. I couldn't get the heatsink bracket in place, so then i rotated the heatsink so the fan points to the bottom of the case.
The bracket is adjustable and i know it should work as ive installed it on other extreme 4's in the past the same heat sink that is.

When i install these heat sinks i remove the fan first so i have more room to work with adjust the mount and go from there. the fan is easily removable by just pulling back the clip and pulling the fan mount off.

also if you have it blowing back it does pull some air over the memory and cools them. only really maters if your running high mhz mem with some volts under them.
My 5 Current Rigs-Guest-Main-Work/Spare-HTPC-Laptop
3770K@ 4.8GHz -Main
2500k @ 4.7GHz -Guest PC
3570K @ 4.5 -HTPC
MSI GT70-2OC/770m-998/4800MHz -Laptop
Crossfired XFX290X@1150/1500mhz-EKWB (Main)|GIGA-OC7970WF3@1250/1850 (HTPC)
MSI 970GTX (Guest) ||Asus480GTX@900/2000 (work)
Reply With Quote