Thread: Completed CHOMIE HAF-X Watercooled Rig
View Single Post
  #1 (permalink)  
Old October 21, 2012, 05:39 PM
Chomie Chomie is offline
Top Prospect
Join Date: Mar 2012
Location: Calgary, Alberta
Posts: 90

My System Specs

Default CHOMIE HAF-X Watercooled Rig

Chomie HAF-X Watercooled Rig

Hello All! This is my first build and have to say the amount of planning and research has really paid off.
I won't bore you with a bunch of text but I would really appreciate any comments on what you would have
done differently or what you like about my rig.


Case: Cooler Master HAF-X
Motherboard: ASUS Rampage IV Formula ATX X79 LGA 2011
Processor: Intel Core i7-3930K 3.20GHZ (Currently O.C to 4.6GHz @ 50 degrees C) w/ EKWB HF Supreme Block
RAM: Corsair Vengeance 16 GB DDR3 1600MHz
Video Card: EVGA GTX 680 Superclocked 2GB w/ Backplate w/ Acetal EN (Nickel) Full Cover Block
PSU: Corsair Professional Series HX1050 - Modular
Rad Fans: 7x Scythe Gentle Typhoon 1850RPM 59CFM @ 28db Fan (Painted white)
Fan Controller: Lamptron FC5V2 5.25" Bay, 4 channels
Solid State: Corsair Force Series GT SATA III, 240GB
Hard Drives: 2x Western Digital Caviar Black 7200RPM SATA III w/ 64MB Cache

Radiator 1: XSPC - Performance Triple 120mm Radiator (RX360)
Radiator 2: XSPC - Performance Dual 120mm Radiator (RX240)
Reservoir: Koolance RP-452X2 Dual Bay 5.25" Rev 2.0
Pumps: 2x Swiftech MCP655 12V Industrial Pump, 1/2 Barbs
Tubing: Primochill Primoflex Pro LRT UV Red, 1/2" ID - 3/4" OD
Fittings: Assorted Matte Black Bitspower

Paracord - Red, white, black
Cold White- Special Edition CCFL Cold Cathode kit - 15cm (6')
Deep Red - Special Edition CCFL Cold Cathode kit - 15cm (6')
EK -LED 3mm TWIN WHITE for Plexi blocks back-lighting
XSPC Sleeved 3mm Dual LED Module - Red (582133)
DazMode Protector
UBER PURE KILLCOIL 99.9985% Silver Wire
24-Pin ATX DarkSide Single Braid Cable - Military
ATX (EPS) 8-pin Female Connector - Black
ATX (EPS) 8-pin Male Connector - Black
Fan Extension cable 3-pin 12
8-pin PCI-E GPU Power Single Braid Cable - Black
3:1 DARKSIDE Heatshrink Tube - 3/16 (1/8) Black
3:1 DARKSIDE Heatshrink Tube - 3/8 Black

**This project couldn't have been completed without and


#1) The Concept - Created with Google Sketchup &

#2) Cooler Master Haf-X Case

#3) We Begin

#4) Case Mods

#5) Fan Painting & Paracord Sleeving

#6) More Toys!

#7) The Assembly

#8) Time for Water Cooling!

#9) Finished Results.

Hope you have enjoyed my build as much as I did building it!

Chomie out.
Reply With Quote