View Single Post
  #12 (permalink)  
Old October 7, 2012, 12:17 PM
PcWizTech PcWizTech is offline
Top Prospect
Join Date: Nov 2011
Posts: 222

My System Specs


Originally Posted by dandelioneater View Post
Check out my bios screens:

You'll want to also go to digi+ power management under the cpu section and adjust load line calibration to at least the second highest.

Then make sure that your memory timings and DRAM voltage are what they are supposed to be.

everything else should be defult or auto. then save, boot into windows, and test for stability using OCCT. Prime 95 and LinX stress these chips pretty hard and they say it may not be good for them.
Hey, i set my settings just like you had in the screenshots ( i don't know if you wanted me to do that) and i also checked the timing and voltage for the RAM. Unfortunately, however, my PC failed to start. I went into bios, reset to defaults and now im up in running. I am, however, running at 3.8ghz now :/
Reply With Quote