View Single Post
  #1 (permalink)  
Old August 19, 2012, 10:57 AM
zoob zoob is offline
Hall Of Fame
Recent iTrader Ratings
Period: 1 Month 6 Months 12 Months
Positive Positive 0 0 0
Neutral Neutral 0 0 0
Negative Negative 0 0 0
Join Date: Aug 2007
Location: Toronto, ON
Posts: 1,146

My System Specs

Default QNIX 27" / Gigabyte Z87X-OC / 16GB DDR3 / DDR4 / 7970 with FC block

Everything sold as-is, in working condition unless otherwise noted. Everything can be tested before completing transaction. Mostly WYSIWYG, unless otherwise noted. Please make an offer if you don't agree with pricing.

Shipping at cost of buyer unless stated otherwise. Really far east or west coast shipping costs may be $5 more.
During work - Downtown Toronto near Yonge/King
During evening/weekends - Markham near Major Mackenzie/McCowan
My postal code: L6E 1N1 (use for shipping estimates or approximate location for pickup)

Want to buy/trade for ::
- D5 PWM pump

Selling ::

2 x QNIX 27" 2560x1440 PLS Monitors
$300 (left) & $250 (right, due to slight defect), or both for $525.
One has slight defect (dark line) see image here:
Original boxes, power supply, DVI cables included. Both OC to at least 96Hz, YMMV.

Gigabyte Z87X-OC & 4x4GB Samsung HCH9 :: $250 shipped
Retail box, accessories. Flashed for Haswell Refresh.

G-Skill 4x4GB DDR4-2400 RAM :: $220 shipped

PowerColor Radeon HD 7950 :: $135 shipped
Retail box, accessories.

Radeon 7970 :: $200 shipped
Komodo full cover block with single slot bracket installed. Will look for stock cooler.

Samsung 1TB 840 EVO :: $400 shipped
BNIB sealed.

Core 2 Duo CPUs Bundle :: $20
2 x E6550
8 x 512MB DDR2 PC2-4200U Various brands

Lot of as-is video cards :: $50 OBO
BFG 8800GT 512MB w/Accelero S1 :: Black screen when 3D driver loads - candidate for baking
PNY 9800GT 1GB :: Re-flowed once with a hot-air pencil
ASUS 5870 :: Dead VBIOS, missing screws for backplate (misplaced)
Radeon 7970 reference design w/Accelero Xtreme 7970 :: No POST with card
Matrox QID LP PCIe :: Seized fan, will try to find dongle

Apogee XT Rev 1 :: $10
Missing one screw on the inlet plate. It was working when I last had it in use, but as-is. Could use a good soak in ketchup.


Last edited by zoob; July 24, 2015 at 07:27 AM.
Reply With Quote