View Single Post
  #1 (permalink)  
Old June 30, 2012, 09:56 AM
Zaqueo Zaqueo is offline
Rookie
 
Join Date: Jun 2012
Posts: 4
Default [S.M.A.R.T.] Raw Read Error Rate Failed?

Hello guys, thanks for watching this post. So I just wake up and the OS told me that the HD was having some issues. So I did a Chkdsk on Windows.. and there was no problem. Then I booted Ubuntu and saw that SMART found a problem. And then I saw this. (Look at ID:01 - Raw Read Error Rate)

Code:
HD Tune: SAMSUNG HD502HJ Health

ID                               Current  Worst    ThresholdData     Status   
(01) Raw Read Error Rate         1        1        51       33031    Failed   
(02) Throughput Performance      252      252      0        0        Ok       
(03) Spin Up Time                83       80       25       5238     Ok       
(04) Start/Stop Count            100      100      0        492      Ok       
(05) Reallocated Sector Count    252      252      10       0        Ok       
(07) Seek Error Rate             252      252      51       0        Ok       
(08) Seek Time Performance       252      252      15       0        Ok       
(09) Power On Hours Count        100      100      0        1556     Ok       
(0A) Spin Retry Count            252      252      51       0        Ok       
(0B) Calibration Retry Count     252      252      0        0        Ok       
(0C) Power Cycle Count           100      100      0        504      Ok       
(BF) G-sense Error Rate          100      100      0        1        Ok       
(C0) Power Off Retract Count     252      252      0        0        Ok       
(C2) Temperature                 64       56       0        917538   Ok       
(C3) Hardware ECC Recovered      100      100      0        0        Ok       
(C4) Reallocated Event Count     252      252      0        0        Ok       
(C5) Current Pending Sector      99       99       0        72       Ok       
(C6) Offline Uncorrectable       252      252      0        0        Ok       
(C7) Ultra DMA CRC Error Count   100      100      0        1        Ok       
(C8) Write Error Rate            100      100      0        28       Ok       
(DF) Load/Unload Retry Count     252      252      0        0        Ok       
(E1) Load/Unload Cycle Count     100      100      0        507      Ok       

Power On Time         : 1556
Health Status         : Failed
I googled some other SMART HD examples from other HDs and for Raw Read Error Rate, the "worst" value is between 100 or 200, something like that..
Why mine is 1? Maybe it's not that bad? Actually I'm on Windows right now, of course SMART is still telling me that there is a problem but i haven't lost any file.. I'm worried to not be able to boot in the future. Maybe its a problem from SMART? What do you recommend guys?

Thanks for the patience.
c ya
Reply With Quote