View Single Post
  #8 (permalink)  
Old June 13, 2012, 08:58 AM
SugarJ's Avatar
SugarJ SugarJ is offline
Join Date: Jan 2008
Location: Langley, BC
Posts: 6,758

My System Specs


If the cable says CPU on it, that's the EPS connector he's talking about.

I'd remove the board from the case, and try booting with CPU and 1 stick of ram only. Not even GPU, use the onboard. You're trying to make sure nothing is shorted out in the case. If it boots, then install in case and try again. If it boots again in the case, then add components/connections 1 at a time.
Reply With Quote