View Single Post
  #5 (permalink)  
Old May 5, 2012, 02:02 AM
Luciel's Avatar
Luciel Luciel is offline
Top Prospect
Join Date: Oct 2011
Location: Malaga, Spain
Posts: 174

My System Specs


Itīs time for the Antec 620 H2O CPU Cooler.

First thingīs first, letīs unpack it as itīs brand new.

Right this is provably the most simple part to prep, what Iīve done here is, using masking tape Iīve covered all the piping and instead of covering the cpu cooler itself, Iīve wrapped a plastic bag around. I know it may sound stupid but check the bag hasnīt got any holes!

Iīve cleaned it even though itīs new, we donīt want any dust particles on the surface. For paint types, techniques, waiting times and so on check the first post of this thread which has a link to the main tutorial thread where everything is explained in detail. Do feel free to ask if you still have doubts after that though.

Once dry, Iīve removed all the taping and done! Ready to go in!

Next up, the power suply (at the time of writing Iīve bought a more powerfull PSU as the one I had for this project doesnīt cut it for the gpu, so even though I painted it and it works, Iīll be posting a tutorial with the new PSU so the next post will remain "reserved").
Reply With Quote