View Single Post
  #48 (permalink)  
Old April 3, 2012, 11:36 PM
Killswitch's Avatar
Killswitch Killswitch is offline
Join Date: Sep 2007
Location: Sault Ste Marie, Ontario
Posts: 830

My System Specs


Ugh, 2:30am.... I'm going to be toast tomorrow. This better be worth it.

Quick update!!

I took the dremel to the bracket like Lowfat suggested in another thread. (Thanks again for the idea!)
Fits like a glove.

Now ladies and gents, it's leak testing time! Ya there were a few to deal with.
But easily solved by paying more attention to the fitment of the compression fittings on the different components. For example I HAD to use the barbs that came with the Enzotech block. I HAD to use a 45 degree fitting off the top of the GPU block because of the proximity of the PCB to the fitting.... etc.
All sorted out though and all looks good and dry.

First casualty so far in this project are my trusty wire strippers. I broke them cutting #8 machine screws to mount the bottom 120 rad. Gotta deal with that first thing in the AM. I have to install a 2-way radio into a water truck in the steel plant at 9am.

Time for bed!!

Reply With Quote