View Single Post
  #24 (permalink)  
Old April 2, 2012, 05:41 PM
sswilson's Avatar
sswilson sswilson is offline
Join Date: Dec 2006
Location: Moncton NB
Posts: 15,624

My System Specs


Do you have a link to it?



Hrmmmm.... where did'ya pick that up?


Looks like it's the same block hold down plate for either AMD or intel, it's just the motherboard plate that changes?

Pretty sure their new blocks work the same way, and it's handy if you swap between different hardware, but it does make the AM3 retention plate a bit larger than required.... pity.....


Just had a look at both of my EK HF blocks. One is a mount from a year or so ago, the other is a new(er) mount with the R4 (2011 compatible) mounts, and both would work fine in your situation as they don't use an upper MB retention bracket. Instead they just have the bolts coming straight up through the standard MB mounting holes.
Gigabyte Z97N-WIFI / i7 4770K / 2X 8G Gskill 1866 Sniper / XFX XTR 750 / EVGA GTX 970 SSC ACX 2.0+
Corsair 380T / Corsair H100i GTX AIO/ Intel 730 Series 480GB SSD / Seagate Barracuda 1TB / Dell UltraSharp U2412M

Asrock AM1H-ITX / AM1 Athlon 5350 / 2X4G Gskill PC3-14900 / Intel 6235 Wi-Fi / 90W Targus Power Brick / 250G Samsung 840 Series SSD / Mini-Box M350 / 24" Westinghouse L2410NM

Last edited by sswilson; April 2, 2012 at 05:58 PM.
Reply With Quote