View Single Post
  #1 (permalink)  
Old April 13, 2007, 07:01 PM
francois methot francois methot is offline
Top Prospect
 
Join Date: Mar 2007
Location: Ottawa, ON
Posts: 123
Angry D975XBX2 can't boot after FSB increase

It happen before because I did a big jump for OC the FSB frequency...I had a second mobo and change it.

Then, I was running fine and stable on the second mobo at FSB 333MHz with 667 MHz memory.
I decide to try 2 stick of 800 MHz memory. I had in mind to slowly increase the FSB to 400 MHz and match the new memory.
Reset back all OC to stock and start increasing the FSB by step of 5 MHz starting at 266 MHz.

Suddenlly, the computer did not boot, no post.
I try a very long reset, remove the battery. I try to boot with floppy to recovery the bios, but cannot load the floppy!!!

Is it dead?
Can I ship my first mobo somewhere to fix that problem?
__________________
Intel Core 2 Quad QX6700 OC 3.6GHz
Mobo D975XBX2, 4GB DDR2 800 MHz Corsair TWIN X Dominator
4X 36GB Raptor in RAID 0 (on Intel controller with dual Boot Win32 Pro)
3X 360 GB Seagate No RAID (on Marvell controller for Apps, Paging and Back up)
EVGA GeForce 8800GTS Dual DVI- 2x Monitors 24'' 1920 x 1200
Water Cooling, Ultra X3 1000 Watts PWS.
ASUS Laptop G2S T7700 @ 2.4GHz
Reply With Quote