View Single Post
  #3 (permalink)  
Old February 22, 2012, 04:15 PM
Silent_Avenger's Avatar
Silent_Avenger Silent_Avenger is offline
MVP
F@H
 
Join Date: Nov 2011
Location: Toronto
Posts: 472

My System Specs

Default

Hrm if I remember my electronics correctly you'll need a TIP31(3A) transistor or TIP120(8A) transistor. Also an old molex(female) power connection, 3.5mm jack(will only use L or R signal not both) and splitter, solder iron, solder, flux, wire and your LEDs also preferably a DIY pcb board. I made a quick diagram instead of trying to explain it. I'd test it out somehow first like using an old set of speakers with a headphone jack and an old psu or power brick for power just in case you have something shorted out it won't harm you main system.



Hope this helps.
__________________
Main System //// Dedicated Folding PC 1 //// Dedicated Folding PC 2 //// Laptop

Youtube Channel: http://www.youtube.com/DarkDivinityPC

I fold for a cure. Team 213366 and 54196.

Last edited by Silent_Avenger; February 22, 2012 at 06:53 PM.
Reply With Quote