Thread: Work in progress RV02 Wire Sleeving and other stuff
View Single Post
  #9 (permalink)  
Old February 11, 2012, 11:00 PM
invisibleninja06 invisibleninja06 is offline
Rookie
 
Join Date: Dec 2008
Location: Brome, Quebec
Posts: 29

My System Specs

Default More pictures, terminal block!

Well i took some more photos and finished up my terminal block.



Another image of terminal block and wires entering it. Lights 5v front leds and cold cathodes but cathodes are separated by original RV02 case switch for fans. I removed the switches from the 180mm fans because they are not needed with my fan controller and serve a better function for case lighting.



Now a picture of how i cleaned up the switch wires from fans. Due to the fact that the switch are not in line with power wire i has to solder the yellow (full power) signal wire and the black wire together then i sleeved and shrinked all three wires together isolating the soldered wires by electrical tape.



Lastly we have two picture of fan wires, one is of connection between fan and controller and other is the cable management clamp i got from mdpc.



Reply With Quote