View Single Post
  #2 (permalink)  
Old January 16, 2012, 08:03 PM
Silent_Avenger's Avatar
Silent_Avenger Silent_Avenger is offline
MVP
F@H
 
Join Date: Nov 2011
Location: Toronto
Posts: 472

My System Specs

Default

I would probably stay away from res/pump combos and try to make your res work and use the D5 pump. Plus once/if the pump dies usually you have to replace the whole thing rather than buying or upgrading to a new pump. I've seen loops go res>pump>top mounted rad>CPU>rear exhaust mounted rad>GPUs>res. Of course every one is different but you shouldn't need 2 loops unless doing some heavy overclocking or you have some high restrictive parts in your loop. Easy thing to do is take a full side picture then open up MS paint or similar program and start tracing out the paths of your tubing. Much easier than cutting tubing then changing your mind half way through.
__________________
Main System //// Dedicated Folding PC 1 //// Dedicated Folding PC 2 //// Laptop

Youtube Channel: http://www.youtube.com/DarkDivinityPC

I fold for a cure. Team 213366 and 54196.
Reply With Quote