View Single Post
  #3 (permalink)  
Old January 4, 2012, 03:08 PM
KaptCrunch's Avatar
KaptCrunch KaptCrunch is offline
Hall Of Fame
 
Join Date: Feb 2008
Location: Ontario
Posts: 2,946
Default

Quote:
Originally Posted by generallee989
Hey all,

Im new here and just completed my first watercooling setup. It was simple and easy with a solo CPU loop....

Well now I have a design and layout I drew up after researching a ton and picking items.

I have been told to stay away from Y splitters and I understand why but...

What I cannot find info on and know many people dont like to use them because they believe its pointless is, how do I put RAM in a loop?

With their high resistence of liquid bypass, wont it cause the CPU to heat up being there is not as much flow to them?

Can you place a splitter/Y before RAM/CPU then reconnect it after without issues?

Many people ask why do I want to do this. My answer to them is I have them money, want the look, and dont care about overclocking(Was a past hobby and came to realize that 1 to 2 fps isnt worth the short lifespan hassle).

Any thoughts or advice is much appreciated.

Thanks in advance.
cos series is a no brainer/mess for flow will be same on all blocks with weakest block of loop set the flow

with using a Y combined with ram cpu

cpu more restrictive then ram for flow will take the leasest route (ram)

mock up (outside of case) the loop and calibrate after the Y and match flow by restricting the ram flow
thats how to set up a parelle

Y useage best used on dual GPU WB's in series loop
(note after -< branch keep tube lenght same >-)
Reply With Quote