View Single Post
  #6 (permalink)  
Old December 12, 2011, 10:06 AM
clshades clshades is offline
Hall Of Fame
 
Join Date: May 2011
Location: Calgary
Posts: 1,486

My System Specs

Default

I would adjust a few things in that case if the wires are long enough.
  • Move the audio cables down through the lowest holes and try it get it to go down behind the PSU if there is space. Come straight up behind the psu to the header on the motherboard. (if possible)
  • move the usb header down the same way
  • Pull the sata cables through the holes and leave the excess behind the motherboard tray
  • flip the rad 180 degrees
  • Move the Harddrive up a couple slots so you can hide more of the SATA cable
  • Move the CDrom drive down to the bottom so you have nearly zero power wire and sata wire showing.
  • Pull as much of the excess wiring from the PSU in behind the motherboard tray bend it if you have to.
  • Buy 2 different sizes of black zip ties to help hold stuff down behind the other side panel.
  • Use comon sense zip tying wires together you don't wanna have to cut them everytime you change out a fan or hard drive. Similar things together different things apart. Your discretion of course.
Here is a resource for sleeved cabling:
DARKSIDE BRADED CABLES : DazMode, The Best Canadian PC Watercooling and Modding Store!
__________________
__________________________________________________ __________
"Lesson's cost money... good ones costs lots" -Tony Beets (gold rush)
__________________________________________________ __________
Mah Rig now
Mah Rig before
My stuff for sale.
Reply With Quote