View Single Post
  #7 (permalink)  
Old May 13, 2008, 09:21 AM
3.0charlie's Avatar
3.0charlie 3.0charlie is offline
3.0 "I kill SR2's" Charlie
Join Date: May 2007
Location: Bedford QC
Posts: 9,948

My System Specs


You did connect the case's connectors (those pesky black, small, plactic, rectangular-shaped conectors) to the board, right? Well those metal "spikes" on the board are the pins. Find the two pins that are used to power the board - the same two that you connected the case's Power On button. Flick the PSU switch On. Now to short: use a very small flat screwdriver (also called a jeweler's screwdriver) and touch both pins to start your computer. DO NOT TOUCH any other pins at the same time.
Hydro-Quebec is salivating...
Reply With Quote