View Single Post
  #2 (permalink)  
Old May 13, 2008, 08:17 AM
magictorch's Avatar
magictorch magictorch is offline
Hall Of Fame
F@H
 
Join Date: Apr 2007
Location: Annapolis Valley, NS
Posts: 1,835
Default

Theres a 10 step no post guide here on the forum too but try below.

Try a barebones start first-disconnect all fans, HD-leaving the Ram, board and GPU. Its a promising sign that the green light comes on anyway.

Check boards seated on its standoffs properly-ie only the holes with the white circles should be attached to standoffs. There are other holes on that board that dont have white circles.

Also check the case power on wires are in the right place-theres a labeled white adapter that comes with the board to neaten up the power wires, HD light etc that comes from the case-i

Other than that take the board out the case and do a barebones start and hopefully you've got some working ram to test in the system
__________________
White Night:: i7920 (4ghz), Rampage III extreme (A1), Mushkin XP 1600 (9,9,9,24),SLI480., white MM horizon.
CPU: Feser 220 int.|Apogee GTZ|S.Res.rev2| MCP655.

GPU: PA120.3|S.Res.rev2|2x EK FC blocks| MCP655.
Reply With Quote