View Single Post
  #5 (permalink)  
Old September 11, 2011, 09:07 PM
Hail Ceasar's Avatar
Hail Ceasar Hail Ceasar is offline
Top Prospect
 
Join Date: Oct 2008
Location: Castlegar, B.C.
Posts: 86

My System Specs

Default

Quote:
Originally Posted by zsamz_ View Post
yess that vtt is way too high around 100-125 should do it
and reduce the pwm frequency around 8xx

raise the memory speed the uncore is way high
set your memory speed to 1600 for uncore of 16x3200
you might even be able to do 1600mhz and uncore of 17x
set memory voltage to 1.67
memory voltage droops on that board
I made those changes, and I got 1 boot out of it... It seems to try skipping the 2nd black & white screen... Once I was in the system ran until I tried to run prime 95, an it bSOD
__________________

Intel i7 Quad Core 920 @3.8GHz | eVGA X58 x3 SLI | HAF 932 | Corsair 1000w | WD SSD 256gb | WD 3200 1TB | Seagate 2TB | 6x2GB DDR3 Mushkin XP3| MSI GTX 680+EK WB| 24" BENQ E2400HD | 19" Samsung 953BW

Swiftech 655 | Swiftech MCR220 | Apogee GTZ+1366 | EK Spinbay Res | EK Waterblock | Primochill 5/8" | Bitspower Compression Fittings

Last edited by Hail Ceasar; September 11, 2011 at 09:23 PM.
Reply With Quote