View Single Post
  #4 (permalink)  
Old September 11, 2011, 08:37 PM
zsamz_ zsamz_ is offline
Hall Of Fame
Join Date: Apr 2009
Location: laval Qc
Posts: 1,096

yess that vtt is way too high around 100-125 should do it
and reduce the pwm frequency around 8xx

raise the memory speed the uncore is way high
set your memory speed to 1600 for uncore of 16x3200
you might even be able to do 1600mhz and uncore of 17x
set memory voltage to 1.67
memory voltage droops on that board
maximus IV extreme @ 5.1 1.41v

evga e760 +920 4.8 water5.0+ on phase linx stable
gtx285 tri-sli
dfi ut-p35 lt
e8600@4.6 1.38v
too much ram
Reply With Quote