Thread: Case Mod Carbon Lian Li
View Single Post
  #1 (permalink)  
Old August 13, 2011, 10:05 PM
kyle_L's Avatar
kyle_L kyle_L is offline
Hall Of Fame
Join Date: Nov 2008
Location: Port Coquitlam, bc
Posts: 1,119

My System Specs

Default Carbon Lian Li

i started with a 2 lian li v1000 cases, one had a modded and damaged interior when i got it, the other had a tripple rad grill and fill port drilled on the top, so i decided to put the 2 together, the inside and bottom from one and the front from the other. i will still have the other case but it will be sold off to fund the next project.

hardware consists of:
2600k @3.8
Gigabyte Z68x-UD4-B3
Noctua NH-D14 no fans
Corsair Vengence 1600 4x4GB
zalman 850watt sleaved powersupply
Dazmode Sleeving kit.
Dazmode White cable extentions
4x 120mm Fractal design 1000rpm fans.
1x64gb kingston ssd, mayby 2
1tb WD black Sata3
Asus 6970 Direct CU II
__________________________________________________ _________________

so now on to the case. i wanted something that was not as common and what everyone else had done with these cases, so i started wrapping it in carbon fibre film.

case all disassembled

both side panels done

motherboard tray and bottom divider

front covers

cables from Dazmode

quick shot of the outside

Hand pained every edge and rivet

quick teaser shot while i mark out a hole i forgot to drill for the 8pin motherboard connector

case is done.

case all lit up

Gotta Love Timmies Coffee.

Last edited by kyle_L; February 13, 2012 at 06:38 PM.
Reply With Quote