View Single Post
  #8 (permalink)  
Old August 7, 2011, 04:25 PM
3.0charlie's Avatar
3.0charlie 3.0charlie is offline
3.0 "I kill SR2's" Charlie
F@H
 
Join Date: May 2007
Location: Laval, QC
Posts: 9,599

My System Specs

Default

Stick the ram with no errors in the motherboard, power On and go directly to BIOS; select "Load Fail safe", and make sure the ram voltage is correct per your stick manufacturer. Restart. If it loads fine, then it's the bad stick. If it fails to load, then the board is toast. Yes, both can fail.

Also, when running Memtest: 1 error, or a million makes no difference. Only 0 is acceptable.
__________________
Hydro-Quebec is salivating...
Reply With Quote