View Single Post
  #5 (permalink)  
Old April 20, 2008, 02:56 PM
RussianRedScorpion's Avatar
RussianRedScorpion RussianRedScorpion is offline
Rookie
 
Join Date: Apr 2008
Posts: 30
Default

Quote:
Originally Posted by MpG View Post
Shrouding never hurts, but the documented benefits tend to measure in the low, single-digit percentage realm. More important is to seal the fans against the rad, be it with a full shroud or just regular foam tape. Extra fans... if you want. As rads go, Thermochills rads have below-average air resistance, so it's a little less important. If you have room and don't mind the extra noise, feel free.

It boils down to basic physics. In the process of passing through the first rad, the air will become warmer. Thus, the second rad will be trying to cool the water down using this same (warmer) air. The warmer the air, the smaller the temperature difference between it and the water in the second rad. The smaller the temp difference, the less heat will be removed from the loop. The slower the air moves, the more drastic this effect will be, but it'll never go actually go away, even with high-powered fans.

3/8" tubing is still plenty for chipset cooling and can seriously help reduce clutter around the socket area. If possible, making the NB block the first after the radiator will ensure that it gets the coolest possible water, since it usually benefits the most from cooler temps (But it's not critical).
Should I really worry about the whole sandwich-radiator thing...I do have two Thermochills and I get them because of their low air resistance (and uber performance). I knew from the start that I would eventually expand to full blown water cooling with sandwiched radiators.

About the separate chipset loop...would it really matter?
Out of the first loop it goes straight to the CPU and not the chipsets...so I would guess that would not affect CPU temps...am I wrong?

Thanks In Advance
Reply With Quote