View Single Post
  #3 (permalink)  
Old May 2, 2011, 08:26 PM
windwithme windwithme is offline
Join Date: Jul 2009
Posts: 580

Information on hardware devices in the operating system
Atheros wireless network card installed

Performance tests
CPU 99.8 X 33 => 3293.4MHz
C1E Activated
DDR3 1064.4 CL7 7-7-20 1T

Hyper PI 32M X 4 => 17m 32.908s
CPUMARK 99 => 508

Nuclearus Multi Core => 11878
Fritz Chess Benchmark => 13.01/6243

CrystalMark 2004R3 => 190657

CPU => 3.16 pts
CPU (Single Core) => 1.31 pts

PCMark Vantage => 11922

Windows Experience Index - CPU 7.1

The CPU-Z cannot display the correct voltage, and BIOS must be used to find the correct voltage
The situation is the same with the H55H-I generation, which may be related to the design of the special PWM that results in some software errors regarding the voltage information
The i3-2120 clock goes up to 3.3GHz, providing a performance improvement of up to 10-20% with the new architecture
In many of the above tests, this platform has pretty good test data, and especially in the ITX area, the performance level is high

Temperature performance (room temperature about 18 degrees)
System Standby - 20-26

CPU full speed - 44-49
Intel Burn Test v2.4, Stress Level Maximum

Regarding the temperature of the i3 CPU, the 32nm process has always performed well, and the original thin heat sinks were used in the test
Did not exceed 50 degrees at full speed, but of course after installation in the chassis,
this will depend on differences in the environment or system thermal convection, raising the temperature by about 5 to 8 degrees

Power Consumption Test
System Standby - 25W
Reply With Quote