View Single Post
  #2 (permalink)  
Old April 20, 2011, 03:16 AM
windwithme windwithme is offline
Join Date: Jul 2009
Posts: 550

VGA/DVI/HDMI/Display Port
4 X USB 2.0(Red/Black)
2 X USB 3.0(Blue)
1 X eSATA/USB 2.0 (share the red)
1 X IEEE 1394a
1 X RJ-45 (network connector)
1 X S/PDIF Out Port

The power pack is covered with heat sinks.
Both the appearance and the texture are quite good; the design of the radiating area is also considered.

The heat sink of the H67 chipset also adopts the same material and design

BIOS Homepage
O.N.E Adjustment page
CPU Clock 100 is adjusted to 107MHz
Graphics Core Ratio Limit is the overclocking option of GPU
DDR3 DRAM Multiplier 10.66/13.33

Voltage options
There are four CPU VCore Mode options, including SPEC Volgate/Auto/Offset Mode/Fixed Mode
CPU VCore Offset +0.010~+0.520V
CPU VCore Fixed 1.000~1.790V

There are four IGD VCore Mode options, including SPEC Volgate/Auto/Offset Mode/Fixed Mode
IGD VCore Offset +0.010~+0.520V
IGD VCore Fixed 1.000~1.520V
DRAM Voltage 1.300~2.200V

IGD Memory can select the capacity of the shared main storgae that is required by the built-in GPU.

CPU Configuration
Enable and disable some relevant functions of the CPU
Common HT technology or the function of selecting the use of a few cores

PC Health Status
The built-in monitoring chip of MB can be used to know the current status of various primary voltages or the temperature conditions inside the system

Above is the BIOS settings of windwithme in the BIOSTAR TH67XE overclocking.
H67 chipset is characterized by All In One positioning, thus overclocking only requires CPU external frequency/GPU frequency/DDR3 frequency.

Test platform
CPU: Intel Core i5-2300
VGA: Integrated Graphics
HDD: Intel X25-V 40GB RAID 0
Cooler: Intel original radiator
OS: Windows7 Ultimate 64bit

Preset performance
CPU 99.8 X 28 =>2794.4MHz
Start Turbo Boost and C1E
DDR3 1331.2 CL7 7-7-20 1T

Hyper PI 32M X4 => 12m 16.446s
CPUMARK 99 => 476
Reply With Quote