Thanks for the help.....Presently my Multiplier is set 9x and FSB Speed set 1515 Mhz, Unlinked = CPU Clock Speed 3.42Ghz. I have gone and changed my vCore to Manual (not Auto) and have set it at 2.75v, to start with. Should I start with 3.0v, when I was trying my OC in Linked n Synch's and had the VCore set to 1.35v. Its probably good to not "over-volt" either right?
What symptoms would I get when not enough Voltage?
Another thing, I have my Memory set to 800 Mhz, but it shows 757 Mhz? If I bump that 800 up, the other number itself goes up...Prersemt;y my Memory is "Expert", 4-4-4-12 1T @ 2.15v. If I set my Memory to "Optimal", my 780i Board sets the Timings to 5-5-5-18 2T @1.85v, I know the correct Timings for this Crucial Ballistix is 4-4-4-12. When I first set these Timings down and didn't change the default Voltage from 1.85 to 2.15v it wouldn't Boot up into Windows.
Thnaks again.
|