Hi all,
Still playing around with OC'ing my E8400 / Evga 780i MOBO (and Evga 8800GTX GPU)....here's where I'm at so far:
In BIOS
System Clocks
Multiplier 9x
CPU N/2 Ratio "Disabled"
PCIe x 16_3 100 Mhz
SPP / MCP Ref Clock 200 Mhz
Spread Spectrum Settings
HT Spread Spectrum "Disabled"
PCIe Spread Spectrum (MCP) "Disabled"
SATA Spread Spectrum "Disabled"
FSB & Memory Config
SLI-Ready Memory - "Disabled"
FSB Memory Clock Mode "Linked"
FSB Memory Ratio "Sync Mode"
FSB (QDR) 1515 Mhz
Actual Memory (DDR) 757.5 Mhz
Memory Timings "Expert"
4-4-4-12 1T Command Rate @2.15v
CPU Config
Limit CPUID Max Val "Disabled"
Intel Speed Step "Disabled"
CPU Thermal Control "Disabled"
C1E Enhanced Halt State "Disabled"
Execute Disable Bit "Enabled"
Virtualization Tech "Enabled"
System Voltage
CPU Core 1.35v
CPU FSB "Auto" 1.3v
Memory 4-4-4-12-1T @ 2.15v
Nforce SPP "Auto" 1.4v
Nforce MCP "Auto" 1.5v
HT Nforce SPP/MCP "Auto" 1.2v
Nforce MCP Aux "Auto" 1.5v
GTLVRef Lane 0-3 "Auto" + 00mV
Thats it, presently OC'd @ 3.42 Ghz, however Stock Cooling. I have been running Prime 95 version 25.6 Torture Test "Small FFT" for 2 hrs.
No errors
Temps on both Cores between 62 - 67 degrees
* Will be definitely putting in some sort of AfterMarket Cooler, inquiring as what will fit on my 780i Board and within my Raidamx Smilidon Case.
8800 GTX OC Settings:
GPU Clock 615 Mhz
Memory 2.0 Ghz Combined
Shader 1.439 Ghz
Idle Temp 51 degrees
Load Temp (Crysis) 69 degrees
* Notes:
1. Memory Speed is 800 Mhz, but it is running at speed 757.5 Mhz
Likley due to being Linked / Sync'd, also I am running 4 x 1GB Sticks in XP SP2
2. Still get the "Long Diminishing Beep" from my 8800 GTX whan I "Shut Down" - the only way I have been able to correct this is by setting everything (excluding 8800 Clock Speeds) back to Stock Speeds.
3. Haven't run 3DMark 06, however 3D Mark 05 is just over 20,000 (unsure how this compares to others)
Thats it.....any "input" is welcomed....
Cheers
