[trayton]

Hello all I have a few posts right now and appreciate all the input!

This one is concerning my setups and RAM. I'm hoping to put 12GB in the newer mobo I just got that has 6 slots (where as all my others have 3 (foxconn) and 4 (intel/gigabyte) I do believe?

Gigabyte EX58-UD3R (4 slots) (not sure if 1.6 or 1.7 to be honest)
GIGABYTE - Motherboard - Socket 1366 - GA-EX58-UD3R (rev. 1.7)

1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)
2. Dual/3 channel memory architecture
3. Support for DDR3 2100+/1333/1066/800 MHz memory modules

(Go to Memory Support List for the latest memory support list.)

This machine currently has Gigabyte EX58-UD3R, i7 920 DO and 6GB Mushkin 1600 Triple Channel RAM
Part Number : 991659 (998659)

Intel DX58SO
Intel® Desktop Board DX58SO - Overview

• Four 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR3 1600 MHzς, DDR3 1333 MHzς, DDR3 1066 MHz
• Support for up to 16 GBς of system memory

This machine currently has Intel DX58SO, i7 920 DO and 6GB GSKILL 1600 Triple Channel RAM
Part Number : F3-12800CL9-2GBNQ

Foxconn BloodRage
Foxconn - Products: Motherboard
Triple DDR3 2000(**oc)/1800(**oc)/1600(**oc)/1333/1066 x 3 DIMMs, Max.12GB (Notes:Pls check our memory support list for all details)

This machine currently has Foxconn BloodRage, i7 920 DO and 6GB OCZ 1600 Triple Channel RAM
Part Number : OCZ3G1600LV6GK

ASUS P6X58D-E
ASUSTeK Computer Inc. - ASUS - ASUS P6X58D-E
6 x DIMM, Max. 24 GB, DDR3 2000(O.C.)*/1600/1333/1066 Non-ECC,Un-buffered Memory
Triple channel memory architecture
Supports Intel® Extreme Memory Profile (XMP)
*Hyper DIMM support is subject to the physical characteristics of individual CPUs.
*Refer to ASUSTeK Computer or this user manual for the Memory QVL (Qualified Vendors Lidts).

This machine is the one I want to put 12GB in currently has ASUS P6X58D-E, i7 920 DO and 8GB GSKILL RipJaws 1333 which I will have to remove as its 4x2GB Sticks in Triple Channel setup.
Part Number : F3-10666CL7D-4GBRH ( I know this has to come out to make room for the other 6 sticks I want to put in)

The 3x2GB CORSAIR RAM I have to put in it is : CMX6GX3M3A1333C9 (then just curious which one of the systems above I could mix with it? Or should I really get the exact same stuff?

Thanks in advance for any comments/suggestions and assistance :)