View Single Post
  #6 (permalink)  
Old March 15, 2008, 10:30 PM
-n7- -n7- is offline
Join Date: Dec 2007
Location: Edmonton
Posts: 268

So i wanted to update this tonight, since i finally got around to testing the dimms individually.

I did testing relatively briefly to save some time, so don't take these as absolutely 24/7 stable clocks, only more thorough testing would show that for sure.

I ran Memtest86+ initially, & then HCI to about 20+% to get screenies.
Though not always, if i can get 20% or higher with HCI, it's usually very close to stable if not stable.

Mushkin 996580 XP2-6400 - DDR2-800 4-4-4-12 (two 2x2 GB kits) tested one dimm at a time.
vdimm = 2.1V set in bios, which is read as 2.02V actual via software

dimm 1 = DDR2-1124 5-5-5-15
dimm 2 = DDR2-1080 5-5-5-15
dimm 3 = DDR2-1100 5-5-5-15
dimm 4 = DDR2-1090 5-5-5-15

I'm very happy with the results.

Worst of the four dimms does 540 MHz @ less than warrantied vdimm. :)

Reply With Quote