View Single Post
  #8 (permalink)  
Old November 30, 2010, 11:20 PM
mo' power mo' power is offline
Hall Of Fame
F@H
 
Join Date: Jan 2007
Location: Scarborough
Posts: 1,437

My System Specs

Default

The bi-wire connection separates the woofer from the combined midrange and tweeter section. A bi-wire compatible speaker has 4 binding post terminals. These two sets of terminals allows the speaker to be split into two independent sections. The split connects the mid and high frequency drivers to one set of terminals and the low frequency driver to the other pair. As these speakers are shipped from us, there are gold-plated bridges connecting the two sets of terminals that allow the speaker to be connected as a traditional loudspeaker.

Front Floorstanding Main Speakers
  • System Type: 2 Way - 3 Driver Floorstanding Main Speakers
  • Woofer\Midrange: Dual 6.5 inch Poly-coated Drivers with Butyl Rubber Surrounds
  • Tweeter: 1 inch Neodymium Balanced Silk Dome Ferrofluid Cooled For Longer Life
  • Power Handling: 50 - 160 Watts
  • Frequency Response: 49 - 20K Hz
  • Sensitivity: 89dB
  • Crossover Frequency: 3500 Hz PCB Mounted Circuitry
  • Impedance: 8 Ohms
  • Enclosure: Bass Reflex Design Internally Braced
Center Channel Speaker
  • System Type: 2 Way - 3 Driver Center Channel
  • Woofer\Midrange: Dual 4.0 inch Poly-coated Drivers
  • Tweeter: 1" Neodymium Balanced Dome Ferrofluid Cooled For Longer Life
  • Power Handling: 30 - 100 Watts
  • Frequency Response: 80 - 20K Hz
  • Sensitivity: 86dB
  • Crossover Frequency: 8000 Hz PCB Mounted Circuitry
  • Impedance: 8 Ohms
  • Enclosure: Bass Reflex Design
Rear Surround Satellite Speakers
  • System Type: 2 Way - 2 Driver Surround Speakers (Wall Mountable)
  • Woofer\Midrange: 4.0 inch Driver
  • Tweeter: 1" Neodymium Balanced Dome Ferrofluid Cooled For Longer Life
  • Power Handling: 30 - 100 Watts
  • Frequency Response: 80 - 20K Hz
  • Sensitivity: 86dB
  • Crossover Frequency: 8000 Hz PCB Mounted Circuitry
  • Impedance: 8 Ohms
  • Enclosure: Bass Reflex Design
These are the specs available and the amp is rated at 110W/channel. Pioneer VSX-520K.
__________________


EBAY(http://myworld.ebay.ca/scott0639)

Last edited by mo' power; November 30, 2010 at 11:26 PM.
Reply With Quote