View Single Post
  #4 (permalink)  
Old March 6, 2008, 01:36 PM
low351's Avatar
low351 low351 is offline
Top Prospect
Join Date: Jan 2008
Location: Montreal, Canada
Posts: 206

My System Specs


Thanks Barbarossa.

yycraven, The back fan is exhaust. I have the front fan in, the side fan in, and the one on the bottom next to the PSU is the stock Scythe fan blowing in. So with the Heatsync fan blowing back and the back fan exhausting I should have positive pressure in the case pushing out. I didn't lap the HS yet, the operative word is yet. You should have an easy time of it putting it in with the 775 push pins. Also there is an aluminum finned block near the bottom that you can see in the pic just before the one of the sticker, you want the fan to push through that ideally, I couldn't mount it that way since the fan would push up rather than line up with my back exhaust. I tried it though and didn't see a difference, but it would be optimal and easy on a 775 install.

Reply With Quote